Zynq UltraScale+ MPSoC ZCU102 Evaluation طقم

Product Description

The ZCU102 Evaluation Kit enables designers to jumpstart designs for automotive, industrial, video, and communications applications. This kit features a Zynq™ UltraScale+™ MPSoC with a quad-core Arm® Cortex®-A53, dual-core Cortex-R5F real-time processors, and a Mali™-400 MP2 graphics processing unit based on 16nm FinFET+ programmable logic fabric by AMD. The ZCU102 supports all major peripherals and interfaces, enabling development for a wide range of applications.

Key Features & Benefits

• Optimized for quick application prototyping with Zynq UltraScale+ MPSoC
• DDR4 SODIMM – ZKEEP0Z 64-bit w/ ECC attached to processing system (PS)
• DDR4 Component – ZKEEP1Z 16-bit attached to programmable logic (PL)
• PCIe® Root Port Gen2 x4, USB3, Display Port, and SATA
• 4x SFP+ interfaces for Ethernet
• 2x FPGA Mezzanine Card (FMC) interfaces for I/O expansion, including 16 ZKEEP2Z/s GTH transceivers and 64 user-defined differential I/O signals

Featured AMD Devices

Featuring the Zynq UltraScale+ XCZU9EG-2FFVB1156 MPSoC

System Logic Cells (K)

600

Memory (Mb)

32.1

DSP Slices

2,520

Maximum I/0 Pins

328

PRODUCT INFORMATION

Specifications

Board Features

Featuring the ZCU102 Evaluation Board

Configuration

• Onboard JTAG configuration circuitry to enable configuration over USB
• Dual Quad-SPI flash memory
• Boot from SD card

Memory

• PS ZKEEP3Z DDR4 64-bit SODIMM w/ ECC
• PL ZKEEP4Z DDR4 component memory ([ZKEEP5Z x 16] devices) at ZKEEP6Z / 2400Mbps DDR
• ZKEEP7Z IIC EEPROM
• Dual ZKEEP8Z Quad SPI flash
• SD card slot

Control & I/O

• 6x Directional Push Buttons (5x PL, 1x PS)
• DIP switches (8x PL)
• PMBUS & System Controller MSP430 for power, clocks, and I2C bus switching
• USB2/3 (MIO ULPI and 1 GTR)**

Expansion Connectors

• 2x FMC-HPC connectors (16 GTH Transceivers,  64 differential user defined signals)
• 2x PMOD headers
• IIC

Communication & Networking

• RGMII communications at 10, 100, or ZKEEP9Z/s. Serial GMII interface-supports a ZKEEP10Z/s SGMII interface
• 4x SFP+ cage
• SMA GTH support (4x SMA Tx/Rx connectors)
• UART To USB bridge
• RJ45 Ethernet connector
• SATA (1 x GTR)**
• PCIe Gen2x4 Root Port**

Display

• HDMI video input and output (3 GTH)
• External Retimer device driving an HDMI output connector
• 9x GPIO user LEDs (8x PL, 1x PS)
• VESA DisplayPort 1.2 source-only controller supports up to two lanes of main link data at rates of ZKEEP11Z/s, ZKEEP12Z/s, or ZKEEP13Z/s.

Clocking

• Programmable clocks
• System clocks, user clocks, jitter attenuated clocks
• 2x SMA MGT input clocks

Power

• ZKEEP14Z wall adapter or ATX

** Switch enables either PCIe Root Port OR SATA, USB2/3 & DisplayPort

What’s Inside

• ZCU102 Evaluation Board
• Access to a full seat of Vivado™ Design Suite: Design Edition
• Ethernet Cable
• Targus USB-3
• USB3 Adapter
• USB Micro Cable
• Power Cords and Adapter
• Access to SDSoC Environment

Documentation

xtp426-zcu102-quickstart

ug1182-zcu102-eval-bd