Wahy Electronics

مقاومة كربونية 10kΩ 0.25W زراعة عادية

(4.6)
متوفر في المخزون SKU: 7DA6D07252
0.15 EGP
توصيل سريع لجميع المحافظات
ضمان استرجاع لمدة 14 يوماً
دعم فني واستفسارات عبر واتساب
المقاوم الكربون10kΩ ZKEEP0Z من خلال الثقب

الRS 10 كيلو أوم ZKEEP0Z through-hole carbon-film resistor is an axial, epoxy-coated component designed for PCB mounting and general-purpose electronic use. It has a compact ceramic body (approximately ZKEEP0Z diameter × ZKEEP1Z length) with axial leads for easy insertion and soldering. Marked with color bands for value recognition, the part presents a small footprint that fits well in tight board layouts and breadboard prototyping.

Manufactured using carbon film on a ceramic core, the resistor provides stable resistance at low cost and exhibits long-term stability under typical environmental conditions. Rated for 0.25 watts dissipation (at ZKEEP0Z in free air), it handles everyday signal and biasing tasks in low-power circuits. The leads are solder-plated copper for reliable solder joints, and the epoxy coating is resistant to solvents, abrasion, and chipping to protect markings and the resistive film.

Performance is characterized by moderate temperature coefficient and broad operating temperature limits (from −ZKEEP0Z to +ZKEEP1Z), making it suitable for hobbyist, repair, and many commercial applications where tight precision is not required. The rugged welded cap-and-lead construction improves mechanical strength; users should avoid prolonged exposure to excessive heat during soldering to preserve stability and markings.

سمات:
  • متوفر بمقاومات من 1 Ω إلى 9.1 MΩ.
  • جسم محوري مدمج (≈ZKEEP0Z × ZKEEP1Z).
  • الاستقرار على المدى الطويل.
  • يؤدي النحاس مطلي باللحام.
  • طلاء راتنجات الايبوكسي عالي المقاومة للمذيبات والتآكل والتقطيع.
  • هيكل متين ملحوم بغطاء ورصاص لتحسين القوة الميكانيكية.
  • انخفاض مستوى الضجيج وموثوقية عالية.
  • مُصنف بـ ZKEEP0Z في الهواء الحر.
المواصفات:
المواصفاتالقيمة
المنتج:مقاوم فيلم الكربون RS PRO (محوري)
المقاومة:10 كيلو أوم
الطاقة المقدرة:ZKEEP0Z
التسامح:±5%
التكوين / التكنولوجيا:فيلم الكربون (مسحوق الكربون + راتنجات الايبوكسي)
نمط الهيكل/الجسم:محوري سيراميك، ZKEEP0Z × ZKEEP1Z
أبعاد الرصاص:Ø طول ZKEEP0Z × ZKEEP1Z
الحد الأقصى لجهد التشغيل:ZKEEP0Z
الحد الأقصى لجهد التحميل الزائد:ZKEEP0Z
نطاق درجة حرارة التشغيل:-ZKEEP0Z إلى +ZKEEP1Z
معامل درجة الحرارة:-500 جزء في المليون/درجة مئوية إلى +350 جزء في المليون/درجة مئوية
نمط التركيب:حامل PCB (محوري)
مخطط Pinout:
مخطط البصمة:
التطبيقات:
  • مقاومة السحب لأعلى أو السحب لأسفل لوحدات التحكم الدقيقة.
  • عنصر انحياز لمكبرات الترانزستور.
  • الحد الحالي لـ LEDs أو المكونات الأخرى.
  • جزء من دائرة توقيت RC.
  • شبكة مقسم الجهد.
  • مطابقة معاوقة الإدخال/الإخراج.
  • مقاومة ردود الفعل في دوائر Op-Amp.
  • تكييف الإشارة للأغراض العامة.
  • التعليمية والنماذج الأولية على الألواح.
  • تحميل المقاوم لدوائر الاستشعار.
محتويات الحزمة:
  • 10x المقاوم الكربون 10kΩ ZKEEP0Z من خلال الثقب
ورقة البيانات
BrandGeneric
CategoryElectronic Components (Through-hole)
SKU7DA6D07252
Stock9 units
4.6
(4.6)

بناءً على 248 تقييم موثق من العملاء